Ornek bır CCcam.cfg dosyası burada
winrar dan kurtarın ve CCcam kullanıcıları /var/etc ıcıne koyunuz
Not: dıkkat daha evvel CCcam.cfg dosyanız var ıse onu baska bır yere yedek almanızı tavsıye ederım
Cfg hakkında tum soru ve sorunlar ıcın buradan yazabılırsınız
CCcam.cfg nasıl ayarlanır, cccam.cfg nedir , cccam.cfg mantığı nedir
CCcam.cfg nasıl ayarlanır, cccam.cfg nedir , cccam.cfg mantığı nedir
örnek bir cccam.cfg dosyası
PHP- Kodu:
# CCcam team uvadi CCcam v1.2.0
#
# Special greets go to Dale Cooper, the RuDream and ofcourse HDLteam
#
# For system without new enigma socket.... capmtserver is your friend ;-)
#
################################################## ####################
# Arkadaslarin veyahut clients F: satirina yazilacak #
################################################## ####################
# syntax for to add a friend user to CCcam with the max up hops limit
# sharing of emus (default = 1), allow emm (default = 1), and optional
# downshare limits per share (default = no limits)
# emus are shared only one level down, even if no limits given
#
F: user password 3 0 0 { 0:0:5 }
################################################## ####################
# C: satirinada arkadaslarininki yazilacak CCcam server #
################################################## ####################
# syntax for to add a client connection to other CCcam
# add yes on end to use friends emus (non public private key/emu,etc...),
# but only works when corresponding F line on server has '1' for <shareemus>
#
#C: <hostname> <port> <username> <password> <wantemus>
#
# example:
#
# C: someserver.somedomain 12000 user1 pass1
# C: 192.168.1.2 12000 user2 pass2
# connects to CCcam without use of friends emus
#
C: ipnummer/dyndns poort user password yes
################################################## #############################
# CCcam den harici baska servere lere baglanmak icin
################################################## #############################
################################################## ###
# Burayada N: satiri ekleyerek newcamd/newcs server baglanmak icin
################################################## ###
#N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)>
#
# example:
#
N: ipnummer/dyndns poort user password deskey
#################################################
# R: satirida radegast server'e baglanmak icin
#################################################
#R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
R: ipnummer 678 0100 000080
#############################################
# L: satirida camd3 server'e baglanmak icin
#############################################
#L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
#
# example:
#
L: ipnummer 567 dummy dummy 0100 000080
################################################## ####################
# Other config settings #
################################################## ####################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s
#
SERVER LISTEN PORT : istediginiz port numarasi standart olan 12000 dir # default is tcp 12000
# server can give some info about server and client connections
# and cardinfo
# default port is 16000 voor telnet
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use: echo servers | telnet localhost 16000
#
#INFO LISTEN PORT : 16000
# same info also available in your browser
# go with your browser to http://ip_CCcam_server:16001
#HTML INFO LISTEN PORT : 16001
# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3
# if timing should be shown in OSD and debug output
# default is no (turned off)
#
#SHOW TIMING : yes
# turns debugging on and off
# default is no (turned off)
#
#DEBUG : yes
# should CCcam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
#NEWCAMD CONF : yes
# configure what EMM blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# B: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
B: /dev/sci0 00
B: /dev/sci1 00
# disable all client EMM globally
# saves lots of CPU, but you won't get any updates anymore
#
# default: no
#
#DISABLE EMM : yes
# overrule the nds boxkey (4 byte hex)
#
# BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
#
#example
#
#BOXKEY: /dev/sci0 00 11 22 33
# what Softcam.key should CCcam try to read
# defaults to /var/keys/SoftCam.Key
#
SOFTKEY FILE : /var/keys/SoftCam.Key
# what AutoRoll.key should CCcam try to read
# defaults to /var/keys/AutoRoll.Key
#
AUTOROLL FILE : /var/keys/AutoRoll.Key
# what constant.cw should CCcam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
STATIC CW FILE : /var/keys/constant.cw
# in this file you can configure what CAIDs CCcam should ignore
# defaults to /var/keys/CCcam.ignore
# file content can be like
#
# I: ca4 id6 ignore allways this caid/ident
# S: ca4 id6 sid4 ignore caid/ident only on sid
#
CAID IGNORE FILE : /var/keys/CCcam.ignore
# write wrong logins to file
# defaults is off
#
LOG WARNINGS : /tmp/warnings.txt
# stealthy login to newcamd/newcs server, identify as mgcamd
# default: no
#
# NEWCAMD STEALTH : yes
Eger Gbox ilede baglanmak istiyorsaniz X: line yapmaniz gerek ( CCcam 1.7.0 Link Gbox kullananlar icindir)
Ornek:
X: 0100 000000 2 # Mediaguard Issuer
X: 0500 000000 2 # Viaccess Issuer
X: 0501 000000 2 # Art
X: 05FF 000000 2 # Art/Tps
X: 0502 000000 2 # Eurosport/Absat
X: 0600 000000 2 # Irdeto Issuer
Dün 2:02 pm tarafından 
Takvim
Konu: Hazır CCcam.cfg Dosyası İsteyenler Buraya 
